background image

 

IMPORTANT SAFEGUARDS 

 

Your safety and the safety of others are very important. 

 

We have provided many important safety messages in this manual and on your appliance. 
Always read and obey all safety messages. 
 
  

This is the Safety Alert Symbol. This symbol alerts you to potential 
hazards that  can kill or injure you and others. All safety messages  will 
follow the Safety  Alert Symbol and either the words  ”DANGER”  or 
“WARNING”. 

 

                                                                                          
DANGER means that failure to heed this 
safety statement may result in severe 
personal injury or death. 

 

                                                                                            
WARNING  means that failure to heed 
this safety statement may result in 
extensive product damage, serious 
personal injury, or death. 

 
Safety messages will alert you to what the potential hazard is, tell you how to reduce the chance 
of injury, and let you know what can happen if the instructions are not followed. 
 

 

 

Before the refrigerator is used, it must be properly positioned and installed 
as described in this manual,  so read the manual carefully. To reduce the 
risk of fire, electrical shock or injury when using the refrigerator, follow 
basic precautions, including the following: 

 
 
 
 
 
 

  Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an adapter, 

and do not use an extension cord. 

  It is recommended that a separate circuit, serving only your refrigerator, be provided. Use 

receptacles that cannot be turned off by a switch or pull chain. 

  Never clean refrigerator parts with flammable fluids. These fumes can create a fire hazard or 

explosion. And do not store or use gasoline or other flammable vapors and liquids in the 
vicinity of this or any other appliance. The fumes can create a fire hazard or explosion. 

  Do not connect or disconnect the electric plug when your hands are wet. 

  Unplug the refrigerator or disconnect the power before cleaning or servicing. Failure to do so 

can result in electrical shock or death. 

  Do not attempt to repair or replace any part of your refrigerator unless it is specifically 

recommended in this material. All other servicing should be referred to a qualified technician. 

 

Summary of Contents for FF1116W series















Reviews: