9
Remove right pin assemblies from the bottom
of the freezer and refrigerator doors. On the
opposite side, attach the replacement pin
assemblies (located in the plastic bag with the
Use and Care Manual
) with a screwdriver.
NOTE: You must re-use the screws from the
pin assemblies that are removed in this step
when attaching the new assemblies.
Place the refrigerator door on the bottom hinge.
Be sure the door is aligned horizontally and
vertically. Attach middle hinge to refrigerator door
and attach bolt washer to the back of the hinge,
then fix them to middle beam and fasten them with
a screwdriver.
Place the freezer door on the middle
hinge. Ensure that the door is aligned
horizontally and vertically, and that the
gasket seals on all sides before attaching
the top hinge. Attach the top hinge and
replace the hinge cover.
