background image

Adjusting the Level legs  

 

The Professional units (those with a 

BI

 suffix in model number) have 4 

adjustable level legs.  

By turning the legs counter-clockwise

 you can 

increase the height of the unit up to 34” inches high or you may decrease the 
height to about 33” inches 

by turning clockwise. 

 

On Non-Professional models

, there are only two adjustable levels legs in 

the front of the unit.  The two rear legs are stationary; it is not recommended 
that you adjust the front level legs. 

 
 
 
 

Trouble-Shooting Guide 

 

 

During the service of your appliance, you may come across some 
troubles that in most cases result from improper handling of the 
appliance that can easily be eliminated. 

 
Problem #1 
Appliance Fails to Operate After Connecting to the Power Supply

 

       
      

Possible Cause/Solution 

      *Check to make sure the appliance is switched ON 
        (thermostat is in the operating position) 
      *Check to the power of the A/C outlet (plug in a lamp to test) 
      *Check for a failed fuse 

           *Refrigerator line cord may not be plugged in properly 

 

 
 

 

 
 

Instructions for Use 

 
 

Problem #2 

 

10

Summary of Contents for FELIX STORCH FF-6













Reviews: