9
Care and Maintenance
Cleaning Your Appliance
1.
Unplug the appliance, turn the thermostat to
STOP
(
0
) and remove all contents,
including shelves, drip tray and crisper.
:
2.
Wash the inside surfaces with a solution of lukewarm water and vinegar. Wipe dry
with a clean, soft cloth.
3.
Wash the shelves, drip tray and crisper with a mild detergent solution, then rinse and
dry thoroughly.
4.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and
wipe dry with a clean soft cloth.
5.
Wring excess water out of the sponge or cloth before cleaning the area of the
temperature control or any electrical parts.
6.
From time to time, wipe the condenser on the rear wall with a soft
non-metallic brush or vacuum cleaner.
7.
After you have cleaned the appliance, reconnect it to the power
supply, reset the thermostat and return all contents to their place.
CAUTION: Failure to unplug the unit could result in electrical shock or
personal injury.
Power Failure
Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of times the door is opened. If
the power is going to be off for a longer period of time, you need to take the proper steps
to protect your frozen and chilled items.
:
Vacation Time
During long absences, remove all contents. Unplug the appliance, clean it and leave the
doors open slightly to avoid possible formation of condensation, mold or odors.
:
Moving Your Appliance
1. Remove the contents.
:
2. Securely tape down all loose items inside your unit.
3. Turn the leveling legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the appliance stays secure in the upright position during transportation.
Energy-Saving Tips
•
The unit should be located in the coolest area of the room, away from heat-producing
appliances or heating ducts and out of direct sunlight.
:
•
Try not to open the door too often, especially when the weather is damp and hot.
Once you open the door, close it as soon as possible.
•
Occasionally check if the appliance is sufficiently ventilated (adequate air circulation
behind the appliance).
•
Set the thermostat from higher to lower settings as soon as possible (depends on
how loaded the appliance is, ambient temperature, etc.).
•
Before loading items into the unit, be sure they have cooled to ambient temperature.
•
A layer of frost and ice increases energy consumption, so defrost the freezer as soon
as the layer is 1/2" thick.
