Summit CR2115, Instruction Manual, Page: 8 / 12

Page 7
the cooktop firmly in place and seal it onto the counter to avoid any movement
and to provide good insulation.
Note : If your cabinet opening is wider than 12 inches, order an optional
adjustable bracket by calling Customer Service at 1-800-932-4267.
5. Electrical Connection
Before proceeding further, verify that the power supply is disconnected. Verify
that the appropriate electrical supply requirements have been met. Please refer
to the table on page 4 for appropriate electrical requirements. The cooktop is
supplied with a 48-inch long conduit for a connection to an accessible junction
box. The conduit consists of three insulated wires. There is a hot lead conductor
(black insulated-tinned copper), one insulated ground conductor (green
insulated-tinned copper) and a neutral conductor (white insulated-tinned copper).
(See
Wiring Diagram for models CR2115 and CR2230 below and on bottom of
cooktop.)
Attach conductor wires to residence wiring in accordance with national, state and
local electric codes.
Warning
–
Grounding
The entire appliance must be grounded at all times
when the electrical power supply is on. Do not
ground the appliance with the neutral house supply
wire (white). A separate ground must be used.
6.
Remove the plastic film from the cooktop. Clean the cooktop before you use it
for the first time. A thorough cleaning with a recommended cooktop cleaner will
provide a clean, shiny coating on the cooktop surface.
Final Preparations Prior to Use
The next section of the manual covers cooktop use, maintenance, safety and
service information.
Please keep these instructions with your cooktop for future reference.
!
Wiring Diagram