5
•
To ensure proper ventilation for your refrigerator, leave not less that 12” of
space at the top and 4" on both sides and the back.
•
If you are installing the refrigerator next to a fixed wall, leave sufficient space
on the hinge side to allow for the door to swing open at least 120°.
•
Locate the appliance away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight can affect the refrigerator's coating and
heat sources can increase electrical consumption. Extremely cold ambient
temperatures may also cause the appliance to perform improperly.
•
Avoid locating the appliance in moist areas. Too much moisture in the air can
promote rusting and will cause frost to form quickly on the evaporator,
requiring more frequent defrosting of the appliance.
•
Never place any weight on the electrical cord.
3. Reversing the door swing
1. Remove the decorative caps and undo the screws in the top cover and then
take off the top cover.
2. Remove the top hinge pin and inside spring and slide the upper door up, lifting
it away from the appliance.
