Summit accucold CT66BBI Series Manual Download Page 2

 

IMPORTANT SAFEGUARDS 

 

Your safety and the safety of others are very important. 

 
 

Before the  appliance  is used, it must be properly positioned and installed 
as described in this manual,  so read the manual carefully. To reduce the 
risk of fire, electrical shock or injury when using the appliance, follow basic 
precautions, including the following: 

 
 
 
 
 

  Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an adapter, 

and do not use an extension cord. 

  It is recommended that a separate circuit, serving only your appliance, be provided. Use 

receptacles that cannot be turned off by a switch or pull chain. 

  Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or 

explosion. And do not store or use gasoline or other flammable vapors and liquids in the 
vicinity of this or any other appliance. The fumes can create a fire hazard or explosion. 

  Before proceeding with cleaning and maintenance operations, make sure the power line of the 

unit is disconnected. 

  Do not connect or disconnect the electric plug when your hands are wet. 

  Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so 

can result in electrical shock or death. 

  Do not attempt to repair or replace any part of your appliance unless it is specifically 

recommended in this material. All other servicing should be referred to a qualified technician. 

 
 
 
 

  Use two or more people to move and install the appliance. Failure to do so can result in back 

or other injury. 

  To ensure proper ventilation for your appliance, the front of the unit must be completely 

unobstructed. Choose a well-ventilated area with temperatures above 60

°

F (16

°

C) and below 

90

°

F (32

°

C). This unit must be installed in an area protected from the elements, such as wind, 

rain, water spray or drips. 

  The appliance should not be located next to ovens, grills or other sources of high heat. 

  The appliance must be installed with all electrical connections in accordance with state and 

local codes. A standard electrical supply (115V AC only, 60 Hz), properly grounded in 
accordance with the National Electrical Code and local codes and ordinances, is required. 

  Do not kink or pinch the power supply cord of the appliance. 

  The fuse (or circuit breaker) size should be 15 amperes. 

  It is important for the appliance to be leveled in order to work properly. You may need to make 

several adjustments to level it. 

  Never allow children to operate, play with or crawl inside the appliance. 

  Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may 

damage or discolor the interior. 

  Do not use this apparatus for other than its intended purpose. 

Summary of Contents for accucold CT66BBI Series













Reviews: