background image

Single Shot

Instruction Booklet - 2007

You 

MUST

 also view the enclosed DVD 

BEFORE

 using your new treestand!!

Weight Limit 300 lbs. total.  

DO NOT EXCEED THIS LIMIT!

Tree Size: 8” - 20” 

READ ME FIRST!!!

Please read carefully 

BEFORE

 using your new Summit Single Shot Ladder Treestand.

Congratulations!  You have purchased the finest commercially available ladder treestand on the 

market today.  Summit Ladder Treestands are designed and built to provide years of trouble-free, 

successful hunting with a minimum of maintenance and care.  They are certified to meet the require

-

ments of the Treestand Manufacturers Association (TMA) Standards.  This booklet is provided to 

you to outline the recommended use, care and maintenance of your Summit Ladder Treestand.

Warnings and Precautions

Single Shot [82025] - 2007 Instructions - 

PN 11836

IT IS IMPORTANT TO NOTE THAT A TREESTAND FALL CAN OCCUR AT ANY TIME AFTER LEAVING THE GROUND!

YOU MUST FULLY READ, UNDERSTAND AND FOLLOW THESE INSTRUCTIONS!  PLEASE CONTACT SUMMIT TREESTANDS IF YOU HAVE ANY 

QUESTIONS ON THE USE OF THIS PRODUCT!  FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE SERIOUS INJURY OR DEATH!!

BEFORE USING ANY TREESTAND, BE SURE YOU MAINTAIN FULL BODY SAFETY HARNESS ATTACHMENT TO THE TREE AT ALL TIMES AFTER 

LEAVING THE GROUND!!!  YOU MUST STAY CONNECTED TO YOUR FALL ARREST SYSTEM AT ALL TIMES AFTER LEAVING THE GROUND!

DO NOT USE THIS OR ANY OTHER TREESTAND IF YOU HAVE BEEN USING DRUGS (EVEN PRESCRIPTION) OR ALCOHOL OR ARE PHYSICALLY 

IMPAIRED IN ANY WAY!  NEVER USE A TREESTAND WHEN FEELING ILL, NAUSEOUS OR DIZZY!

FOR YOUR SAFETY, DO NOT USE ANY TREESTAND DURING RAIN, LIGHTNING, WINDSTORMS, WHEN TREES ARE WET OR ICY, OR ON TREES 

THAT ARE LEANING, TREES THAT APPEAR DEAD OR DISEASED, ON LOOSE BARKED TREES OR ON UTILITY POLES!!!  NEVER RELY ON A 

TREE BRANCH FOR SUPPORT!

DO NOT USE ANY TREESTAND IF YOU HAVE NOT FOLLOWED THE MANUFACTURERS CARE AND MAINTENANCE GUIDELINES!  NEVER 

MODIFY YOUR STAND BY MAKING REPAIRS, REPLACING PARTS, ALTERING PARTS OR ATTACHING ANYTHING TO IT UNLESS EXPLICITLY 

AUTHORIZED BY SUMMIT TREESTANDS!

ALWAYS INSPECT THE STAND / CABLE SYSTEM OR HANGING STRAPS AND ANY SAFETY GEAR BEFORE EACH USE!  IF ANY PROBLEMS ARE 

FOUND - DO NOT USE THE STAND!  CONTACT CUSTOMER SERVICE FOR THE APPROPRIATE REPAIR / REPLACEMENT PROCEDURE!

NEVER ALLOW THE SAFETY HARNESS TETHER TO GET UNDER OR AROUND YOUR NECK!

IT IS IMPORTANT THAT YOU REMEMBER TO BE PREPARED IF YOU HAPPEN TO FALL AND EMPLOY YOUR SAFETY HARNESS WHILE IN A 

TREESTAND.  STAY CALM AND DO NOT PANIC.  YOU MUST BE PREPARED TO RECOVER FROM YOUR FALL BY EITHER CLIMBING BACK ONTO 

YOUR TREESTAND OR USING A DEVICE SUCH AS THE “TREE DESCENDER” (AVAILABLE FROM SUMMIT, WWW.SUMMITSTANDS.COM, 256-

353-0634).  PRIOR TO HUNTING:  YOU MUST NOTIFY SOMEONE OF YOUR HUNTING LOCATION AND WHEN YOU WILL RETURN!

DO NOT USE ANY TREESTAND UNLESS YOU ARE IN GOOD PHYSICAL SHAPE.  THE ABILITY TO DO SEVERAL PUSH-UPS, CHIN-UPS, SIT-UPS, 

ETC. IS REQUIRED FOR YOUR SAFETY!

ALWAYS USE A HAUL LINE TO RAISE AND LOWER UNLOADED FIREARMS AND BOWS!  FIREARMS MUST BE PULLED UP UNLOADED, 

CHAMBER OPEN AND MUZZLE DOWN!

NEVER CLIMB WITH ANYTHING IN YOUR HANDS OR ON YOUR BACK - USE A HAUL LINE!

PRACTICE USING YOUR TREESTAND AND SAFETY HARNESS AT A LOW LEVEL (5 FEET) UNTIL YOU MASTER ITS USE!

BE WELL RESTED AND NEVER GET IN A HURRY.  HURRYING CAUSES ACCIDENTS!!

INSTRUCTIONS (WRITTEN AND VIDEO) SHOULD BE REVIEWED AT LEAST ANNUALLY.  IF YOU LOAN OR SELL THIS TREESTAND, IT IS YOUR 
RESPONSIBILITY TO FURNISH THE BUYER A COPY OF THESE INSTRUCTIONS AND THE VIDEO THAT CAME WITH THE TREESTAND.  MAKE 
SURE THEY WATCH THE VIDEO AND READ / UNDERSTAND THE INSTRUCTIONS!

CHECK EVERY LADDER SECTION CONNECTION EVERY TIME YOU USE THE STAND.  IF ANY LADDER SECTIONS ARE SEPARATING - DO NOT 

USE THE STAND!  

CHECK THE GROUND UNDER THE STAND TO MAKE SURE IT IS FIRM AND LEVEL.  SLOPING GROUND OR AN UNEVEN SURFACE (ONE LAD-
DER SECTION ON A ROCK) CAN CAUSE YOUR STAND TO TILT OR SHIFT AS YOU CLIMB!

MAINTAIN THREE POINTS OF CONTACT WHEN YOU CLIMB THE LADDER SECTION OF THIS STAND!

Summary of Contents for Single Shot









Reviews: