PG 3
ASSEMBLY
3
1
2
3
4
1.
Position the Seat Frame as shown in
figure 1.
2.
Slide the Rear Legs into the brackets and secure with two bolts and lock nuts. Use Steel Washers on the
outside of the bracket.
See figure 2.
Part Stack: Steel Washer, Bracket, Rear Legs, Bracket, Steel Washer
3.
Slide the Front Legs over the Rear Legs and into the brackets. Secure with two bolts and lock nuts. Use
Steel Washers on the outside of the bracket.
Part Stack: Steel Washer, Bracket, Rear Legs, Bracket, Steel Washer
4.
The finished legs should look like
figure 4.
5.
Ensure all bolts are securely tightened.
