PG 5
PLATFORM
1.
Position the Left and Right platform
Braces and the Yoke as shown in
figure
1.
Note that the teeth on the Yoke
should face down as shown.
2.
Line up the bolt holes and secure
using one
1 3/4” bolt and lock nut
per
side as shown in
figure 2.
3.
Position the Top Ladder Section as
shown in
figure 3
. Slide the ladder into
the ends of the Platform Braces.
4.
Use two
1 3/4” bolts and lock nuts
to secure the ladder section (
figure 4
).
Leave these hand tight for now.
5.
Position the Front and Rear Platform
sections under the support bars as
shown in
figure 5
. The expanded metal
on the platforms should face down as
shown.
6.
Secure the two Platform sections
using eight
2 1/2” bolts and lock nuts
at
the locations shown. Leave these bolts
hand tight until they are all started.
7.
Wrench tighten all bolts from
Step
4 and 6
.
YOKE
(PN 82066.300)
1
LEFT
PLATFORM
BRACE
(PN 82066.200)
RIGHT
PLATFORM
BRACE
(PN 82066.250)
TOP LADDER
SECTION
(PN 82066.910)
COUPLER
3
4
1 3/4” BOLTS, LOCK NUTS -
WRENCH TIGHTEN STEP 7
1 3/4” BOLTS, LOCK NUTS -
WRENCH TIGHTEN
2
2 1/2” BOLTS, LOCK NUTS -
WRENCH TIGHTEN STEP 7
6
BOLT
HOLES
5
REAR
PLATFORM
SECTION
(PN 82066.150)
FRONT
PLATFORM
SECTION
(PN 82066.100)
ASSEMBLY
5