IMPORTANT TO READ
Pressure Regulation Valves (Relief Valves)
Summit to Sea Chambers utilizes redundant pressure regulation valves. These are factory
programmed to ensure a steady, constant pressure. During treatment, there will be a steady
flow of fresh air through the chamber. For proper operation, the air compressor is to be
running throughout the entire treatment. This is important to ensure that CO2 build up does
not occur.
These valves exhaust the old air while maintaining the factory operating pressure. This
pressure is set to 1.3 ATA (4.4 PSI) or 1.5 ATA (7.2 PSI)
WARNING
: Do not tamper with the pressure regulation valves. These are factory
programmed and have no user adjustments. Any sign of tampering with these valves will
void the warranty.
Summary of Contents for SHALLOW DIVE
