SUMMIT APPLIANCE Page 7
4. Remove the screws (3, 6) holding the bottom hinge (2).
5. Remove the decorative plug (8) from the opposite side and plug
the holes on the original side with the decorative plug.
6. Unscrew the remaining leveling leg (4) and screw it back on the
other side.
7. Move the bottom hinge to the opposite side and tighten the
screws. Use any lock washers or nuts if they were part of the
original installation.
8. Replace the door onto the hinge pin on the bottom hinge. Place
the top hinge pin into the door. Insert screws into the top hinge
and tighten. Replace hinge cover.
If you notice the door is not hanging straight, loosen the top hinge,
adjust the door until it is level and retighten the screws.
Operation
The SCR485L beverage refrigerator should be placed where the
ambient temperature is between 32°F and 90°F. If the ambient
temperature is above or below this range, the performance of the
unit may be affected. For example, extremely hot or cold condi-
tions may cause the interior temperature to fluctuate.
Other factors that may affect the inner temperature are whether
the interior light is kept ON or OFF, and whether the bottles are
located on the upper/middle or lower section.
