6
INSTALLATION INSTRUCTIONS
Before Using Your BeautiFridge™
•
Remove the exterior and interior packing.
•
Clean the interior surface with lukewarm water, using a soft cloth.
CAUTION: Keep the unit upright when carrying or moving the cooler. Do not tip the unit more than
40
ᵒ
, otherwise the compressor will be affected and disrupt normal operation.
•
Place the refrigerator on a level and sturdy floor near a power outlet.
Installation of your Equipment
•
The BeautiFridge™ is designed for free-standing installation and indoor use only.
•
Be sure to leave at least 4” of clearance at the back and sides of the cooler for ventilation, and
leave a space with an open angle of 160
ᵒ
for the door.
NOTE:
Keep the cooler away from heat sources and avoid direct sunlight. Never place the cooler in
a location where water can reach it or with unusually high humidity.
Reversing the Door Swing
The door of this unit has the capability of opening from either the left or right side. The door opens
from the left side by default. Should you desire to reverse the opening direction, please follow these
illustrations and instructions:
NOTE:
You will need to tilt the fridge backward to access the lower hinge which holds the screws.
Do not tilt more than 40 degrees and do not lay the fridge flat on its side.
1. Remove the top plastic hinge cover and set aside.
2. Unscrew the three screws from the metal bracket, and set
aside. Carefully remove the door, and place it on a
cushioned surface.
Summary of Contents for BeautiFridge
Page 11: ...11 NOTES ...
