Summerset SSRFR-24D, Manual

Page: 8 / 14

1
BEFORE OPERATING
SHIPMENT ARRIVING DAMAGED:
INTERIOR LIGHT
DEFROSTING
TEMPERATURE ALARM
CLEANING AND MAINTENANCE
IMPORTANT NOTES:
VISIBLE DAMAGE
If your shipment arrives with visible damage to
the box/carton, be sure the damage is noted on
the bill of freight or express receipt and signed
by the person making the delivery. File claim for
damages immediately, regardless of the extent
of damage.
Disconnect all power supplies and batteries
before servicing.
CONCEALED DAMAGES
If damages are unnoticed until the refrigerator
is unpacked, notify the transportation company
or carrier immediately and file a concealed
damage claim with them. This should be done
within (5) days of the delivery date. Be sure to
hold on to the box/carton for inspection. We
cannot assume responsibility for damage or loss
incurred in transit.
CONSTRUCTION ZONES
Keep all stainless steel products away from
construction zones. Construction debris such as
(but not limited to) stone dust, stucco, and lime
dust could damage or permanently discolor
stainless steel products. Keep all caustic chemicals
including chlorine and pool cleaning products
away from stainless steel at all times.
This unit is equipped with an interior LED light
which will be turned ON when the door is open
and the interior fan is stopped at the same time.
You can press to manually turn on or tun off
the light.
The unit defrosts automatically in normal
operating conditions. The evaporator behind the
rear wall of the unit defrosts automatically. The
condensation collects in the drainage channel
behind the rear wall of the unit and flows through
the drainage hole into the drip tray by the
compressor where it evaporates.
However, frost may accumulate on the evaporator
if the unit is repeatedly opened in a high heat or
high humidity location. If this frost pattern does
An audible alarm sounds if the storage
temperature is not cold enough. The temperature
display flashes at the same time.
The cause of the temperature being too high may
be:
• Warm fresh food placed inside.
• Too much warm ambient air flowed in
when rearranging and removing stored
items.
• Power failure for some time.
• The appliance is faulty.
The audible alarm is automatically silenced and
the temperature display stops flashing when the
temperature is sufficiently cold again.
Periodic cleaning and proper maintenance will
ensure efficiency, top performance and long life.
The maintenance intervals listed are based on
normal conditions. You may want to shorten
the intervals if you have pets or other special
considerations.
Exterior cleaning for your stainless steel model
• Your stainless steel model may discolor
when exposed to chlorine gas, pool
chemicals, salt water or cleaners with
bleach.
• Keep your stainless unit looking new by
cleaning with a high quality, all-in-one
stainless steel cleaner/polish on a monthly
basis. Frequent cleaning will remove surface
contamination that could lead to rust.
Some installations will require cleaning on
a weekly basis.
• DO NOT CLEAN WITH STEEL WOOL PADS.
• DO NOT USE CLEANERS THAT ARE NOT
SPECIFICALLY INTENDED FOR STAINLESS
STEEL (This includes glass, tile and counter
cleaners).
• If any surface discolor or rusting appears,
clean it quickly with Bon-Ami or Barkeepers
Friend Cleanser and a non-abbrasive
cloth. Always clean in the direction of the
grain. Always finish this process with a high
quality, all in one stainless cleaner/polish to
prevent further problems.
• USE OF ABRASIVE PADS SUCH AS
SCOTCHBRITE WILL CAUSE THE GRAINING
IN THE STAINLESS TO BECOME BLURRED.
• Rust that is allowed to linger can penetrate
into the surface of the stainless steel and
become impossible to remove.
ELECTRICAL PARTS AND COMPONENTS
WARNING!
not clear within 24 hours, your unit will require
manual defrosting.
Press and hold for 6 seconds, the unit will be
defrosted.
To stop defrost, please repeat the same
interaction.