GENERAL SAFETY REQUIREMENTS
•
The appliance should not be located next
to ovens, grills or other sources of high
heat.
•
The appliance must be installed with all
electrical, water and drain connections in
accordance with state and local codes. A
standard electrical supply (115 V AC only,
60HZ), properly grounded in accordance
with the National Electrical Code and local
codes and ordinances is required.
•
Do not kink or pinch the power supply cord
of the appliance.
•
The size of the fuse (or circuit breaker)
should be 1.3 amperes.
•
It is important that the appliance be leveled
in order to work properly. You may need to
make several adjustments to level it.
•
All installations must be in accordance with
local plumbing code requirements.
•
Make certain that the pipes are not pinched,
kinked or damaged during installation.
•
Check for leaks after connection.
•
Never allow children to operate, play with
or crawl inside the appliance.
•
Do not use solvent-based cleaning agents
or abrasives on the interior. These cleaners
may damage or discolor the interior.
•
Use this appliance only for its intended
purposes as described in this instruction
manual.
•
Keep fingers out of the “pinch point”
areas. Clearances between the drawer and
cabinet are necessarily small. Be careful
closing drawer when children are in the
area.
•
Do not store or use gasoline or any other
flammable vapors and liquids in the
vicinityof this or any other refrigerator. The
fumes can create a fire hazard or explosion.
Improper use of the grounded plug can
result in the risk of electrical shock. If the
power record is cord is damaged, have it
replaced by a qualified or an authorized
service dealer.
WARNING!
