![background image](http://html.mh-extra.com/html/summeraire/shrv2500dd/shrv2500dd_installation-and-owners-operating-manual_1391128004.webp)
4
MODELS AVAILABLE:
230/1/60 single speed 1 H.P
.
208/230/460/575 3 phase single speed 1 H.P. and 2 H.P
Refer to Model selection table for capacities available.
MO
TORS:
T
ype ODP motors with sleeve bearings or fan cooled with ball
bearings depending on application. Available in 1hp or 2hp in various voltages
and phases including 208/230/460/575 3 phase and 230/1 phase..
CABINET
:
Cabinet is w
hite powder coated 18ga. Galvanized with 2” foil
faced reinforced insulation. Includes six (6) Access Doors to service air filters,
drain pans, heat recovery cores and fan and motor assemblies.
HEA
T RECOVERY CORE:
Three (3) pol
ypropylene cores located for easy
removal for cleaning.
BLO
WERS:
Belt Dri
ve, double inlet, forward curved centrifugal
blowers.Painted housing and galvanized wheels.
FIL
TERS:
F
our (4) - 16 “ X 20 “ X 4 “ Pleated Disposable Air Filters
DEFR
OST:
Damper defrost system is actuated w
hen supply air temperature
entering HRV falls below preset temperature. This causes cold supply air to be
dampened off thereby passing ambient indoor air from the building over the
core for a 5-7 minute cycle until the core defrosts.
CONTR
OLS
: P
ower On/Off is field supplied as a fused disconnect. Control
keypad on the unit gives several options including; Hi420 20 minutes of run
time on high speed, Intermittent ventilation repeating cycle of 20 minutes of
fan on followed by 40 minutes of fan off, Auto Off to put the unit into standby
off mode until activated to high speed ventilation by a remote device or a
Remote Push Button or Crank Timer. Standby mode, power to the main control
remains on but the Remote Devices are inactive, cold supply damper closes.
OPTION
AL REMOTE CONTROLS:
Remote On/Of
f toggle switch, Crank
timers, Remote 20 minute Push Buttons (Maximum 6) and Dehumidistats.
CONDENSA
TION:
Unit supplied with Drain Spigots and a
Tee fitting. Drain
hose (5/8 inside diameter) to be field supplied.
MOUNTING:
Indoor application onl
y, fasten at four corners of unit using
field supplied threaded rod for ceiling suspension
SHIPPING
WEIGHT:
750 pounds
NO
TE: ALL WIRING MUST BE IN COMPLIANCE WITH ALL
NATIONAL – STATE – PROVINCIAL AND LOCAL CODES
2500DD-Install-ENG 1/17/06 5:56 PM Page 4
Summary of Contents for SHRV2500DD
Page 5: ...5 ...
Page 6: ...6 ...
Page 22: ...22 WIRING DIAGRAM SHRV2500DD ...
Page 23: ...SHRV2500 SERVICEABLE PARTS 23 CORE THIS WAY UP FILTERS THIS SIDE ...