![background image](http://html.mh-extra.com/html/summeraire/shrv115rd/shrv115rd_product-specifications-and-installation_1391127012.webp)
12
13
2. Mounting the HRV
The RD series of HRV’s may be rotated 180 degrees to permit the connection
of the outside air streams to either the left or right hand side. They are factory
supplied to be installed with the cold air streams on the right. To install this HRV
in the reverse configuration simply remove the plastic drain hole plugs from the
top of the cabinet and insert into the drain holes in the bottom. Included with
the HRV are four (4) laminated rubber hanging straps. These are to be secured at
each of the four corners of the HRV using the screws provided. The other ends
of the straps should be secured to the floor joists using large head screws. To
ensure proper condensate flow, HRV must be installed level in both directions.
3. Condensate Drain hose installation
Two (2) drain spigot assemblies are provided. These are to be installed through
the drain pan holes provided. Simply install the spigot through the openings
and secure in place by installing the nylon washer and nut on the outside of
the cabinet. Ensure that the drain holes that are not used are plugged with the
drain plugs installed in the cabinet. Once installed, attach 1/2” plastic tubing
(not supplied) to the spigots. Create a trap by forming a loop in the tubing.
This will prevent the cross contamination of the air streams through the tubing.
Ensure that the condensate drain tubing is not exposed to freezing temperatures.
Typically the drain line is connected into a floor drain, sink or stand pipe.
Drain Opening Plugs
Create Trap