2
WARNING
Supporting the fan motor shaft is a metal bracket, which is mounted on the left side of the furnace fan. It is secured
to the fan housing by two (2) thumbscrews. This bracket must be removed after installation and prior to powering the
furnace on. Failure to do so will cause damage to the motor and blower assembly.
SECTION I
GENERAL DESCIPTION
The SUMMERAIRE Warm Air Electric Furnace is a multi-positional design permitting installation in the upflow, downflow or
horizontal flow positions.
This furnace may be installed with Air Conditioning or heat pumps.
INSTALLATION OVERVIEW
Install this appliance in accordance with these instruction and all national and local building/safety codes and requirements.
Only connect this furnace to a duct system with a maximum static pressure of 0.6”. Static pressures in excess will result in reduced
air flow and potential elevated discharge air temperatures during heating cycles and reduced discharge air temperatures during
cooling cycles.
Do not operate this furnace without both supply and return air ducts installed with air filters in place or with less than 0.20” external
static pressure.
INITIAL INSPECTION
As soon as you receive this unit unpackage and inspect it thoroughly to ensure that no damage has resulted during the shipping
process.
