If the gate does not close properly:
1. Gate is not properly aligned in the door
frame.
Solution:
To adjust the gate’s alignment,
loosen all four tension bolts and reposition
gate so that it matches the “correct” image.
Re-tighten tension nuts.
2. Pressure of tension bolts needs
adjusting.
Solution:
Loosen or tighten the upper tension
nuts. Ensure the upper latch handle always
remains below the release button. Ensure the
upper latch handle engages securely when the
gate swings closed and that it releases
properly when the release button is pressed.
troubleshooting
maintenance
• Regularly check tension bolts to make sure the gate is securely in place.
• Do not use the gate if any components are damaged or missing.
• Surface-clean with a damp cloth or sponge using mild detergent and warm water.
correct!
incorr
ect!
Colors and styles may vary.
MADE IN CHINA.
D0000000776 5/20
Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-401-671-6551
© 2020 Summer Infant (USA), Inc.
We're here to help!
If you have any questions or need assistance,
contact our Consumer Relations Team at
1-401-671-6551
or
www.summerinfant.com/contact
Mis-aligned
Gate at top is installed
further back then
the bottom of gate
Aligned in door frame
from top to bottom
#33240-50