STAGE 3:
Tub for Growing Child
Position bath tub in a full size bathroom tub
where you are bathing your child. Place child
in tub to bathe (Figure F).
Never leave child unattended while in tub.
STAGE 4:
Extended use
as a Kneeler/Step
Stool -
Place on level, non-slip
surface.
Note:
Maximum weight is
250 lbs (113 kg)
(Figure F and G).
Base/Kneeler/
Step Stool
Bath Support
with pads
Bath Tub
2
FEATURES AND COMPONENTS:
SETUP & USE:
3
SETUP & USE (continued):
F
G
D
STAGE 1 & STAGE 2:
Newborn / Infant Bath Support
To use in sink:
Position bath support on the
bottom of the sink. Place newborn on the
bath support to bathe (Figure D).
To use in adult tub:
Assemble bath center as shown in figures
A and B. Place in adult bath tub.
Place infant on bath support to bathe
(Figure E).
Note:
Never place more than 1“ of water
in tub. Always keep the drain open in the
adult bath tub.
Note:
Always keep drain plug open in infant
bath tub when using bath support.
WARNING
Always check to be sure tub
is secure and snapped onto base before
placing baby in tub. Toddler tub should
fit securely onto base/kneeler. Discontinue use of
tub on base once child is able to pull up to sitting
position.
Never leave child unattended while
in sink or tub.
E
A
B
C
Never leave child unattended while in
sink or tub.
To use tub with base -
Tub snaps onto base for
added security. Position infant tub on top of
base and snap securely onto base. Place bath
support into bath tub. Use bath center as a platform
to reach baby comfortably during bathing (Figures A
and B).
To remove tub from base -
Pull tub apart from base (Figure C).
For all uses, always place
the infant bath tub into a
full sized adult bath tub
or on a flat surface.
Always check water
temperature prior to
bathing child. Bath water
temperature should
never exceed 100º F.
WARNING
