MONITOR OWNER’S GUIDE
3 6 0 4 6
FCC INFORMATION
TIPS & TROUBLESHOOTING
ORDERING REPLACEMENT PARTS
No picture or sound
• Make sure the camera and handheld monitor unit are paired.
• Make sure the camera and handheld monitor unit are turned on.
• Make sure the AC adapters are plugged in.
• Make sure the outlets are working.
Sound but no picture
• Press the Video On-Off Button once to turn on video mode.
• Make sure nothing is blocking the camera.
• Test reception by moving the handheld unit and/or camera to different locations.
• Make sure the camera and handheld monitor unit are paired.
Picture but no sound
• Power the handheld completely off, then turn handheld back on.
• Turn up the volume using Volume Control.
Picture not clear
• Wipe camera lens with microfiber or clean, damp cloth.
• Position the handheld unit closer to the camera.
• Move the handheld unit away from other electronic devices, cordless
phones, etc.
• Adjust the brightness using the Brightness Control.
• Test reception by moving the handheld unit and/or camera to different locations.
• Place camera 1.8m to 2.4m from cot for optimized focus. Make sure to follow
instructions and warnings for camera placement.
Squealing sound coming from speaker on Handheld Unit
• Move the handheld unit and camera further away from each other.
• Turn the volume down using Volume Control.
• Power both the handheld and camera off completely. Remove and re-insert the
handheld battery, then turn both back on.
Handheld is beeping
• If no video, turn on camera.
• Handheld beeps if SleepZone
®
alert is on or camera is out of range.
• If battery is low, charge battery.
After the initial charge, recharge when necessary for 7 hours. We recommend
charging overnight.
Handheld battery does not last long per charge
• Turn VOX and SleepZone
®
off.
• If the handheld has not been used recently, the battery may need a couple
charge/discharge cycles to regain full capacity.
Temperature listed as LL or HH
• Room temperature is outside of the thermometer limits. The thermometer is
effective in between 32°F – 100°F (0°C – 38°C).
If you receive a false error message, please contact our Consumer Relations Team.
Camera isn’t pairing with handheld
• Delete camera and add it back.
SleepZone
®
frequent alerts
• Adjust size of boundary box or zoom out so there is room for your child to move a
little without setting off alerts.
• Check for objects casting shadows into the SleepZone
®
boundary area.
SleepZone
®
not sounding alerts
• Check to make sure that SleepZone
®
feature is activated and that motion is
occurring across the boundary box.
• Increase volume of SleepZone
®
alerts.
We're here to help!
If you have issues or questions not addressed in this Owner’s Guide, contact us at
+44(0) 144 250 5000
or
Do not return the product to the store.
To order replacement parts or extra cameras, contact our Consumer Relations
Team at
+44(0) 144 250 5000
or email
• Camera AC Adapter
• Handheld AC Adapter
• Extra Camera
• (8) Rechargeable Ni-MH AAA size 1600mAh 4.8V batteries
4.
Use the
LEFT/RIGHT ARROW
buttons to
highlight the camera you want to delete.
5.
Press
MENU/SELECT
button to delete camera.
The Camera icon will turn gray once
disconnected.
Deleting a Camera
1.
Press
MENU/SELECT
twice to enter the
Camera Options Menu.
2.
Use the
RIGHT ARROW
button to
highlight the Delete Camera icon.
3.
Press
MENU/SELECT
.
Selecting a Camera
1.
Press
MENU/SELECT
twice to enter the
Camera Options Menu.
2.
Use the
RIGHT ARROW
button to
highlight the Select Camera icon.
3.
Press
MENU/SELECT
.
Selecting a Camera (continued)
Video from the selected camera will
appear on the screen.
•
The camera number (1-4) icon will briefly
appear in the screen's lower right corner.
•
The camera number icon at the top of
the screen will change to the selected
camera.
NOTE:
If using SleepZone
®
, it will
deactivate when you select a different
camera or use Scan Mode.
4.
Use the
LEFT/RIGHT ARROW
buttons to
highlight the camera you want to select.
Synced cameras appear in blue. Current
viewing camera is outlined.
5.
Press
MENU/SELECT
.
1.
Press
MENU/SELECT
twice to enter the
Camera Options Menu.
2.
Use the
RIGHT ARROW
button to
highlight the Scan Cameras icon.
3.
Press
MENU/SELECT
to confir m.
The scan status bar will appear on the
right side of the screen.
•
A red icon indicates cameras that have
lost a signal.
•
Camera Number icon in the indicator
bar changes to show which camera is
currently being viewed.
•
Press any button to stop scanning.
Scanning Cameras
Scan Mode cycles through each active camera ever y 8 seconds.
NOTE:
Scan Mode is only available if more than one camera is synced with the
handheld.
View Cam
Scan
Add Cam
Delete Cam
Camera Options Menu
1.
Press the
MENU/SELECT
button.
By default, Camera Options will be
highlighted in the menu navigation bar.
2.
Press
MENU/SELECT
to confirm.
Four Camera Option Icons will appear in
the Menu Bar.
Note: If only one camera is synced to the
handheld, VIEW CAM and SCAN will be
grayed out and not available.
1.
Plug in camera. A small solid green light
above the lens will indicate power.
If not, press and hold the
POWER
button
for 3 seconds until the green light appears.
2.
Enter pairing mode by pressing the
camera power button until it beeps and
small green light flashes (about 8 seconds).
3.
On the handheld, press
MENU/SELECT
twice to open the Camera Options Menu.
4.
Press the
RIGHT ARROW
button to
highlight the Add Camera icon.
5.
Press
MENU/SELECT
.
6.
Press the
LEFT/RIGHT ARROW
buttons to
highlight the desired camera.
Icons for Synced Cameras:
•
Blue icons indicate synced cameras.
•
Gray icons indicate cameras not yet
synced.
•
A blue ring indicates selected camera.
7.
Press
MENU/SELECT
.
•
A syncing icon will appear next to the
corresponding camera number.
Adding a Camera
Your digital video monitor accepts up to 4 cameras total.
Select the one you want to view, or use auto-scan mode to cycle through each
camera on a 8-second rotation.
Adding a Camera (continued)
•
If syncing is successful: video will appear
from the newly added camera with a blue
ring around the camera icon.
•
If syncing is unsuccessful: an X will
appear over the sync icon.
Repeat steps from this section to sync,
making sure the camera and handheld
are next to each other.
ADDING AND VIEWING CAMERAS
6
Lullabies and White Noise
1.
Press the
MENU/SELECT
button to enter the menu
screen.
2.
Press the
RIGHT ARROW
button to highlight Lullabies
and White Noise icon.
3.
Press
MENU/SELECT.
4.
Press the
LEFT/RIGHT ARROW
buttons to select a different lullaby
or white noise. Press
MENU/SELECT
.
•
A lullaby/white noise will play.
The lullaby icon will appear at the top of
the screen.
Once you choose the lullaby or white
noise sound that you like, this will remain
the active sound until you make a
different selection.
•
Lullabies/white noise can be turned on
and off by pressing the button on the back
of the camera.
NOTE:
Lullabies/white noise will turn off
automatically after 20 minutes.
Lullabies/white noise can also be turned
off through the lullabies/white noise menu.
1.
Navigate to the lullabies/white noise
menu.
2.
Press the
RIGHT ARROW
button to
select the No Sound icon.
3.
Press the
MENU
button.
Voice-Activated Screen Wake-up
(VOX)
The VOX feature, when on, will turn on your
screen when it is in power save mode and
the camera picks up a sound.
1.
Press the
MENU/SELECT
button to enter
menu screen.
2.
Use the
LEFT ARROW
button to highlight
the VOX icon and press
MENU/SELECT
.
3.
Press the
LEFT/RIGHT ARROW
buttons to
highlight VOX on or VOX off .
4.
Press
MENU/SELECT
to confir m.
The VOX icon will appear at the top of the
screen.
NOTE:
When VOX feature is on, VOX is
temporarily suspended when lullabies/
white noise are in use. VOX reactivates
when lullabies/white noise turn off.
Moonlite
®
Night Vision Boost
The Moonlite
®
Night Vision Boost feature helps provide better viewing of your baby,
temporarily, when the room is dark.
1.
Press and hold the
MOONLITE
®
button to illuminate a small LED light on the camera.
•
A
MOONLITE
®
icon will appear in the lower right-hand corner of the screen while
button is pressed.
•
When you release the button, the camera will return to nor mal black & white
night vision.
•
Depending on how far you have placed the camera from the cot, you can
optionally adjust the
MOONLITE
®
brightness.
•
Moonlite
®
will automatically turn off after seven seconds.
Moonlite
®
Brightness Adjustment
1.
Press the
MENU
button.
2
. Press the
RIGHT ARROW
button to
highlight the Settings icon.
3.
Press
MENU/SELECT.
4.
Press the
RIGHT ARROW
button to
highlight the Moonlite
®
icon and press
MENU/SELECT
.
5.
Press the
LEFT/RIGHT ARROW
buttons to adjust Moonlite
®
brightness.
6.
Press the
MENU/SELECT
button to exit.
Caution:
Do not stare directly at Moonlite
®
LED for prolonged periods of time.
THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.
•
STRANGULATION HAZARD
- Children have STRANGLED in cords.
Keep this cord out of reach of children (more than 0.9 m away from
the cot). Use enclosed Security Clips to help secure cord away from
baby’s reach. Never use extension cords with AC Adapters. Only use the AC Adapters
provided.
•
When an AC Adapter is plugged into an electrical outlet, do not touch the exposed end.
•
Test monitor before first use, periodically, and when changing location of the Camera.
•
Do not use monitor near water (such as bathtub, sink, etc.).
•
Keep monitor away from heat sources (such as stoves, radiators, etc.).
•
Make sure there is proper ventilation around all monitor components. Do not place
on sofas, cushions, beds, etc. which may block ventilation.
•
This product is not a toy. Do not allow children to play with it.
•
This product contains small parts. Adult assembly required. Exercise care when
unpacking and assembling the product.
•
Use only the original rechargeable battery provided. If you need a replacement,
please contact Summer Infant Europe using the contact details below.
•
Do not short-circuit supply terminals.
•
Remove battery when product is stored for long periods of time or when
battery is exhausted.
•
Dispose of exhausted battery properly.
•
Keep all batteries away from children.
WARNING
BATTERY WARNING
CONTACT US
Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895
1-401-671-6551
Summer Infant Europe, Ltd.
First Floor, North Wing Focus 31,
Cleveland Road,
Hemel Hempstead,
HP2 7BW, UK
© 2019 Summer Infant (USA), Inc.
Colours and styles may vary.
Please retain information for future reference.
Made in China. 02/19
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
