SummaSign Pro SL D-series Cutters
User’s Manual
General Information
1-1
SECTION 1
1
GENERAL INFORMATION
1.1
INTRODUCTION
The SummaSign Pro SL D-series family of cutters has been designed to produce
computer-generated graphic designs on cut sheet or roll vinyl media. By
replacing the knife with a fiber tip pen, these cutters can also be used to
produce inexpensive previews of new graphic designs on paper.
This manual is a reference guide for installing and operating the SummaSign Pro
SL D-series cutter models. These cutter models feature a drag knife as indicated
by the “D” prefix to the product designation.
This manual covers the following SummaSign Pro SL D-series cutter models:
•
The SummaSign Pro D750 SL, which can handle media widths from 60 mm up
to 762 mm (2.4” to 30”)
•
The SummaSign Pro D1010 SL, which can handle media widths from 110 mm
up to 1020 mm (4” to 40”)
•
The SummaSign Pro D1400 SL, which can handle media widths from 110 mm
up to 1371 mm (4” to 54”)
•
The SummaSign Pro D1600 SL, which can handle media widths from 170 mm
up to 1620 mm (4” to 63.8”)
The phrase “Pro SL D-series cutters” is used in this manual to signify information
that pertains to all cutters in this series. The specific model names “D750 SL”,
“D1010 SL”, “D1400 SL”, and “D1600 SL” are used to denote model-specific
information.
