Sumix SMX-10M1M, User Manual

Page: 44 / 78

Camera Device Settings: Flip Image
40 SMX-10Mx Series USB2.0 Camera User Guide
●
Monochrome mode forces transformation of sensor pixels data into monochrome
stream
●
Nearest Color mode: the Bayer matrix from sensor is transformed into destination
stream using Nearest Color algorithm (the fastest algorithm that gives the worst
image quality (comparing with other algorithms)
●
Bilinear mode: the Bayer matrix from sensor is transformed into destination stream
using Bilinear algorithm (slower algorithm that gives better quality)
●
Laplacian mode: Bayer matrix from sensor is transformed into destination stream
using Linear Interpolation with Laplacian second-order correction terms (the slowest
algorithm that gives best quality)
Note The Color Mode section is disabled when running the SMX-10M1M camera ( see Figure 7-2 Device Settings dia-
log box for the SMX-10M1M Cameras )
Figure 7-2 Device Settings dialog box for the SMX-10M1M Cameras
Flip Image
Use the Flip Image check boxes to flip the image horizontally and/or vertically .
●
Horizontal flipping is done by the camera software (as a result frame rate may
decrease, (
see chapter “Frame Rate Control”
)
●
Vertical flipping is done by the camera hardware