8
1. Prior to each cutting session, run through the daily checklist.
2. Connect the 10" pole saw to a working 120 V outlet using a heavy-duty
outdoor extension power cord.
3. Make a loop in the power cord and push it up through the hole in the handle
and around the cord restraint hook (Fig. 9), then connect the extension co
「
d to
the appliance cord.
4. To turn the tool ON, push and hold the safety lock button (located on the
rear handle) with your thumb and then squeeze the trigger with your fingers.
Once the tool is running, you can release the safety lock button (Fig. 9).
5. To turn the tool OFF, release the
trigger switch (Fig. 9).
NOTE:
Do not press the trigger switch until you are ready to make a cut.
ADJUSTING THE TELESCOPING POLE
1. Disconnect the 10" pole saw from the power supply.
2. press the lock button with one hand, and release the thread sleeve with the
other hand in the direction indicated by the icon (Fi g. 10).