5
4
Technical data
Detailed technical information is available in the technical data sheet Submersible Grinder Pump Type ABS
Piranha which can be downloaded from www.sulzer.com > Products > Pumps > Submersible Pumps.
Maximum noise level ≤ 70 dB. This may be exceeded in certain circumstances.
4�1 Nameplate
We recommend that you record the data from the nameplate on the pump in the corresponding form below, and
maintain it as a source of reference for the ordering of spare parts, repeat orders and general queries.
Always state the pump type, item no. and serial no. in all communications.
ATEX- and FM-rated Piranha pumps are approved for use in hazardous locations. If an Ex-rated pump is
serviced or repaired in a workshop that is not Ex-approved then it must no longer be used in hazardous
locations. In that case the Ex nameplate must be removed and replaced by the standard nameplate, or where
instead a standard and a secondary Ex nameplate is fitted to the pump the secondary nameplate must be
removed.
Standard nameplate
xx/xxx
xxxxxxx
1/min
Max.Liq.Temp: 40°C
Qmax m3/h
Hmax m
Hmin m
Max m
Imp mm
P2: kW
Insul. Cl.
P1: kW
U
N
V
I
N
A
1003-03-5
xx/xxx
1/min
Max.Liq.Temp: 40°C
Weight kg
IEC60034.30 IE3
Qmax m3/h
Hmax m
Hmin m
Max m
Imp mm
P2: kW
P1: kW
U
N
V
I
N
A
1003-03-2
Piranha-S
Piranha-PE
ATEX nameplate
Baseefa 03ATEX07..X
Ex II 2G Ex h db IIB T4 Gb
0598
1001-04
Ex II 2G Ex h db IIB T4 Gb PTB 10 ATEX 1062 X
0598
1232-02
Piranha-PE
Piranha-S
Legend
Typ
Pump type
Cos φ
Power factor
pf
Nr
Item number
n
Speed
r/min
Sn
Serial number
Weight
kg
xx/xxxx
Production date (week/year)
Max.Liq.Temp
Maximum liguid temperature
40ºC
U
n
Rated voltage
V
Qmax
Maximum flow
m
3
/h
I
n
Rated current
A
DN
Discharge diameter
mm
Ph
Number of phases
Hmax
Maximum head
m
Hz
Frequency
Hz
Hmin
Minimum head
mm
P1
Rated input power
kW
Max.
Maximim submergence debth
m
P2
Rated output power
kW
Ø Imp.
Impeller diameter
mm
xxxxxxx
Order number
Insul. Cl.
Insulation Class
