INLET HEAD ASSEMBLY
SECTION
A3
A3.1 BOTTOM GASKET REPLACEMENT
Disconnect the inlet and outlet pipework. Invert dryer if possible ensuring the purge regulators
are not damaged during this operation. Remove base plate or control panel by removing 4
screws from the control box. This will give access to the column bolts, remove these from sub
plate and lift column clear.
A3.2 SILENCER REPLACEMENT (SAR 003 TO SAR 013)
Remove control box as above, this will give access to exhaust silencer.
SILENCER REPLACEMENT (SAR 024 TO SAR 088)
Unscrew silencer from exhaust valve.
A3.3 CONTROL VALVE REPLACEMENT
Remove control panel or base plate from control box, remove bolts from control valve and lift
clear. Ensure o-rings are in place before refitting.
A3.4 EXHAUST VALVE REPLACEMENT (SAR 024 TO SAR 088)
Remove control panel from control box, control pipe from valve, unscrew silencer from valve
then unscrew valve from sub plate pipework. The exhaust valve can now be lifted clear.
For re-assembly follow the reverse procedure always fitting new gaskets and o-rings.
TORQUE SUB-PLATE BOLTS TO 25lbf ft
Page 15 of 30
Summary of Contents for SAR 003
