Sukup Fastir, Owner’S Instruction And Parts Manual

Page: 18 / 70

Assembly & Installation
18
Fastir Plus
Table 7 - Hole-to-Hole Lengths (Measured from Hole Centers) for Tie Bars and Reversing Rods
Triple Auger (1 Stationary) Quadruple Auger (1 Stationary)
Bin
Diameter
Reversing Rod Hole-
to-Hole*
Tie Bar Hole-to-Hole**
Reversing Rod Hole-
to-Hole*
Tie Bar Hole-to-Hole**
(A) (B) (A) (B) (C)
Comp # Length (”) Comp # Length (”) Comp # Length (”) Comp # Length (”) Comp #
Length
(”)
18’-18’7” A85140 36.5 A59021 27 - - - - - -
21’-21’8” A8514 46 A59051 37 - - - - - -
24’-24’9” A8523 55.5 A59071 46 A85153 68.75 A5904 33 A5897 18
27’-27’10” A8515 66 A5910 56 A85261 77 A59061 41 A5897 18
30’-31’ A85260 75.5 A59116 66 A8522 88 A59081 52 A5897 18
33’-34’ A85383 80.5 A5912 71 A8519 97 A59110 61 A5897 18
36’-37’1” A85282 90.5 A59124 81 A85300 106.75 A5912 71 A5897 18
42’ - - - - A85322 130.75 A59131 86 A59021 27
Quintuple Auger (1 Stationary)
Reversing Rod Hole-to-Hole* Tie Bar Hole-to-Hole**
(A) (B) (C) (D)
Comp # Length (”) Comp # Length (”) Comp # Length (”) Comp # Length (”)
42’-42’-8” A85361 157 A59081 52 A59081 52 A59021 27
48’ A8539 185 A59116 66 A59116 66 A59021 27
49’3” A85382 185 A59116 66 A59116 66 A59021 27
*Hole-to-hole measurement is with adjustable spade bolt; cut length of reversing rod 1-1/2” shorter than hole-to-
hole measurement.
**Cut length of tie bar 1-1/2” longer than hole-to-hole measurement.