Bridging or Jumping the Channels
Bridging or Jumping the channels will unlock a palette of sounds and
expand the SL-68’s possibilities. Begin by plugging your guitar into
the top (high sensitivity) input of Channel I, then run a short
instrument patch cable from Channel I’s bottom (low sensitivity) input
to the top (high sensitivity) input of Channel II, then blend Volume I
and Volume II controls to dial in a wealth of new and unique tones.
Channel I Input (top)
Has a high sensitivity and voiced brighter than Channel II.
NOTE:
This input is most commonly used.
Channel I Input (bottom)
Has low sensitivity and offers a slightly warmer tone.
Channel II Input (top)
Has high sensitivity and offers a normal/bassier tonal response.
Channel II Input (bottom)
Has low sensitivity and a normal/bassier tonal response.
INPUTS
