7
SPEAKER OUTPUTS
The PT-100 Signature Edition has individual speaker outputs. Therefore you must
choose the appropriate speaker output jack(s) depending on the impedance (Ω) of
your cabinet(s).
NOTE: Do not use more than one of the speaker impedance groups when connecting
to more than one speaker. For example: 1-16Ω and 1-8Ω or 1-8Ω and 1-4Ω.
One 16 Ω cabinet, use the 16 Ω output jack.
Two 16 Ω cabinets, use both 8 Ω output jacks.
One 8 Ω cabinet, use one 8 Ω output jack.
Two 8 Ω cabinets, use both 4 Ω output jacks.
One 4 Ω cabinet, use one 4 Ω output jack.
IMPORTANT:
• To avoid damage to your amplifier, do not operate without connecting it a speaker
or a suitable load device.
FEEDBACK
This control has a center detent and adjusts the overall feel of the power amp section
from smooth and spongy, (at lower settings) to tight and aggressive (at higher settings).
PRESENCE
Adjusts the amount of high frequencies added to your tone. Turning it clockwise will
add more sparkle.
DEPTH (3-Position Switch)
Selects the amount of low-end boost added to the PT-100’s power section, this will
provide more bottom end while retaining clarity.
Full: + 4dB
Half: + 2dB
Off: Bypassed
EFFECTS LOOP
The PT-100 Signature Edition is equipped with a bypassable (via the In/Active button),
a hybrid/solid-state series/parallel effects loop, which performs well with pedals and
line-level rack gear (selected via the In/Inst.button).
NOTE: When the effects loop is engaged the return level control acts as the amp’s
overall master volume, and the individual channel level controls become your send
levels.
