8
HEDGEHOG 50 MIDI IMPLEMENTATION SHEET
(CONTROLLER ASSIGNMENTS)
CONTROLLER #
FUNCTION
MIDI CH
111
Effects Loop Series
14
112
Effects Loop Mix
14
113
OD (Overdrive)
14
114
Boost
14
115
Mid
14
116
Bright
14
117
Deep - Low (Green)
14
118
Deep - High (Yellow)
14
119
Amp Mute
14
MIDI IMPLEMENTATION CHART
MIDI
Hedgehog ships from the factory receiving data on MIDI channel 14 and in OMNI Off mode. It easily integrates with your favorite MIDI footswitch/system, utilizing Program/Controller
parameters. For detailed information, please refer to the MIDI Implementation chart shown below.
TO CHANGE THE MIDI RECEIVE CHANNEL
1) Press and hold STORE. The led will begin to flash
2) Send a MIDI program change message on the
desired channel.
3) The channel will be updated. Note - all further
messages MUST be on the new channel in order to
be recognized.
4) To abort the process, press STORE.
TO CHANGE THE MIDI CONTROLLER NUMBER
OF A FRONT PANEL FUNCTION
1) Press and hold the switch of the function to be
changed. It's LED will begin to flash.
2) Send a MIDI controller message with the current
channel number and the desired controller number.
3) The function's controller number will be updated.
4) To abort the process, press the selected function
switch whose LED is flashing.
TO RESET MEMORY TO THE DEFAULT SETTINGS
1) Turn off power to the amp.
2) Hold the STORE switch.
3) Turn on power to the amp.
Summary of Contents for HEDGEHOG 50
Page 1: ...USER GUIDE HEDGEHOG 50...