SUHNER MACHINING BEM 20, Technical Document

Page: 32 / 52

4.2 r
epair
If despite strict observance of the manufacturing and test-
ing method the machine should happen to fail, it must be
repaired by an authorized SUHNER agency.
In all orders to the manufacturer please indicate the com-
ponent serial number (1).
4.3 w
arranty
In the event of the tool being improperly handled, used
for purposes for which it is not intended and/or of the ser-
vice and maintenance instructions not being observed by
non-authorized persons, no warranty shall be in effect for
damages/consequential damages.
Complaints can only be honored if the machine is re-
turned in the undisassembled condition.
4.4 s
torage
Temperature range: 20°C to +50°C.
Max. relative air humidity: 90% at +30°C, 65% at +50°C.
4.5 D
isposal
/ e
nVironmental compatiBility
This machine consists of materials which can be dis-
posed of in a recycling process.
Before disposal, render the machine unusable.
Do not throw the machine into the garbage collection.
According to national regulations this machine
must be recycled in an environmentally-friendly
manner.
The following options come with sep-
arate, additional installation and start-
up instructions (No. 50049500):
ES: Chip removal function
SV: Skip feed
EAU: Rapid/working stroke reverse
32
P
ortugúes
Español
Italiano
F
rançais
Deutsch
English