SUHNER MACHINING BEM 20, Technical Document, Page: 31 / 52

3.3.1 f
astening the tool
With an SA30 coupling ring.
With an M8 axial screw.
3.3.2 f
astening an accessory on the spinDle
Mounting of BEM 20 adapter onto quill.
4. S
ERvIcE
/m
aINTENaNcE
4.1 p
reVentiVe maintenance
Lubrication of the spindle: Every week, add 10 ml of oil
into the carrier guide channel. Specified oil ISO G 68.
Original oil ESSO FEBIS 68.
Guide channel (1). Grease fitting (2).
Check oil level when retracted cylinder after 40 hours
of operation (1). Nipple for filling via hydraulic press. Oil
grade 15th (2). Setting oil inlet valve. Open only after con-
sultation with the manufacturer (3).
Proof mass 5 - 48mm (1):
Become 5mm below or exceeded 48mm (notch),
the machine must not be operated!
Ventilation (4). Open only after consultation with the man-
ufacturer.
31
P
ortugúes
Español
Italiano
F
rançais
Deutsch
English