16.
Power input: Plug in the supplied power cable
here.
4
VOLUME
LINE
MIC
LINE
MIC
VOLUME
VOLUME
POWER / CLIP
CH1
CH2
CH3
TO NEXT
CAUTION
RISK OF ELECTRIC SHOCK
DISCONNECT INPUT POWER
BEFORE OPENING. Ta=40°C
WARNING: THIS APPLIANCE MUST BE EARTHED
GEAR4MUSIC KETTLESTRING LANE YO30 4XF UNITED KINGDOM
WWW.
GEAR4MUSIC
.COM
5
3
6
2
4
1
9
10
11
12
13
8
7
14
15
16
INTRODUCTION
Thank you for purchasing the SubZero Active DSP
Column PA. To help you get the most out of your
new product, please read this manual carefully.
CONTROLS & FUNCTIONS
1.
Combo input: balance input, accepts “XLR
1/4”TRS” sockets
2.
LINE /MIC selector
3.
Input level control for CH1
4.
Combo input: balance input, accepts “XLR
1/4”TRS” sockets
5.
LINE/MIC selector
6.
Input level control for CH2
7.
RCA Ii nput: RCA Stereo Input
8
1/8” input: stereo unbalance signal
9.
Input level control for CH3
10.
Treble control: This potentiometer sets the
HIGH TONE level, if rotated clockwise it e
nhances the highs, if rotated counter clockwise
it reduces the highs (in the centre position the
response is flat).
11.
Bass control This potentiometer sets the LOW
TONE level: if rotated clockwise it enhances the
lows, if rotated counter clockwise it reduces the
lows (in the centre position the response is flat).
12.
LINEO UT: XLR mixer output for NEXT PA
system.
13.
Power/Clip indicator Displays the input signal
status in color: Green: power ON, Red: Input
signal clipping.
14.
Power switch: This switch can be used to switch
the diffuser on and off.
15.
Fuse holder: Only r eplace the fuse when the
device is disconnected from mains. Only use
fuse of the same rating and power, the correct
fuse is specified on the rear panel.