Form No. 702703 Rev. E August, 2006
29
Owner’s Manual - Oxygen Therapy Door
General
The following procedures will help you fix most of the problems that
you might encounter with the Oxygen Therapy Door. If necessary,
please feel free to call SSCI Customer Service at (800) 323-7366.
Our experienced Technical Support personnel will be glad to help you.
For more information on contacting SSCI, refer to
SSCI Contact
Information
on
Page 5
.
Part numbers for available replacement parts are shown in Table 2
on
Page 17
. To order replacement parts, refer to
Parts Ordering
Procedure
on
Page 18
.
Possible problems are listed below along with their page references:
There is no oxygen flow into the cage.-----------------------------------------------
Page 31
There is excessive oxygen leakage from the cage. ------------------------------
Page 32
The door does not close or latch correctly.-----------------------------------------
Page 33
One or both of the gauges does not read correctly. -----------------------------
Page 34
Page numbers shown in the
Remedial Action
sections direct you to
step-by-step directions on replacing specific parts. Refer to
Chapter 4, Repairs and Replacements.
If your oxygen therapy door must be returned to SSCI for repairs,
refer to
Returning the Oxygen Therapy Door for Repairs
on
Page 30
for directions.
Warning:
Oxygen is a highly combustible gas. Avoid the use of open
flames, smoking materials, or equipment capable of producing sparks
in any area in which oxygen is being used.
Before servicing or performing maintenance on the oxygen therapy
door, make sure the oxygen supply is turned off at the source.
Chapter 5 - Troubleshooting
