Swii components
1. Master switch
2. Start button
3. Led breathing light
4. Battery cover
5. EVA
6. Stator cover
7. Propeller
8. Protective cover
Open Package Inspection
Item list
Before using this product, please carefully check whether the product package
contains all the following items. If there are any missing items, please contact
Sublue or your dealer.
Swii×1
Charging base×1
Battery×1
Publication×3
Battery and Charging Instructions
Charging step
Swii uses built-in lithium battery. Before first use, please fully charge it to
activate the battery for the smooth running of the product.
Charging base and battery
Charging base bottom
Charging
Charging completed
Install and fasten
Put the battery into the battery compartment. If the battery is installed correctly,
you can hear the "click" sound indicating that it has been installed tightly.
Thruster Inspection and Machine Start
1. Thruster inspection
Press two start buttons in the air, try to run the Swii (no more than 1 minute).
check whether the thrusters run normally. Make sure there is no stuck and noise.
2. Turn on/off
Start
①
Stir the master switch with finger to confirm that the breathing lamp is
flashing normally.
②
After install the battery, pull the master switch for 1 second. The breathing
light begins to flash and the Swii starts normally.
