Black plate (140,1)
北
米
Model "A1170BE-C" EDITED: 2014/ 3/ 17
3-22
Instruments and controls/Warning and indicator lights
&
Turn signal indicator
lights
These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be burned
out. Replace the bulb as soon as possible.
Refer to
“
Replacing bulbs
”
F
11-37.
&
High beam indicator
light
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.
&
Cruise control indica-
tor light (if equipped)
This light illuminates when the cruise
control main button is pressed to activate
the cruise control function. For details,
refer to
“
To set cruise control
”
F
7-39.
CAUTION
If the CHECK ENGINE warning light/
malfunction indicator light illumi-
nates, the cruise control indicator
light flashes at the same time. At
this time, avoid driving at high
speed and have your vehicle in-
spected at a SUBARU dealer as
soon as possible.
&
Cruise control set in-
dicator light (if
equipped)
This light illuminates when vehicle speed
has been set to use the cruise control
function. Refer to
“
To set cruise control
”
F
7-39.
&
Automatic headlight
beam leveler warning
light (models with HID
headlights)
This light illuminates when the automatic
headlight beam leveler does not operate
normally.
If this light illuminates while driving or does
not turn off approximately 3 seconds after
turning the ignition switch to the
“
ON
”
position, have your vehicle inspected at
your SUBARU dealer.
&
Front fog light indicator
light (if equipped)
This indicator light illuminates while the
front fog lights are illuminated.
&
Headlight indicator
light (if equipped)
This indicator light illuminates under the
following conditions.
.
when the light switch is turned to the
“
”
or
“ ”
position
.
when the light control switch is in the
“
AUTO
”
position and the headlights illumi-
nate automatically
