Conventional Cruise Control
Conventional Cruise Control
maintains a constant traveling
speed you set, but it does not
adapt to the other vehicles in front
of you. To activate Conventional
Cruise Control, press the Driving
Assist Mode Select switch to
select cruise control. The cruise
control indicator illuminates. Then,
use the accelerator to reach your
desired speed (approximately
20 mph or more) and press the
Driving Assist Switch to set the
vehicle speed. The set speed can
be adjusted using the “RES+” and “—” switches.
Road Sign Assist
The Road Sign Assist system detects specific road signs using the front camera and/or
navigation system (if equipped and when speed limit information is available) and shows
the sign on the display. The function can also warn you through the display and with
audible alerts. For example, if the system detects that your vehicle’s speed exceeds the
speed limit of the displayed sign or the system detects a do not enter sign and determines
the vehicle has entered a no-entry area, the sign on the display will be emphasized and a
buzzer will sound. The Road Sign Assist system can be customized in the Multi-
information Display.
The following types of road signs can be displayed:
• Speed Limit
• Do Not Enter
• No U-turn
• No Turn On Red
• Stop
• Yield
• Warning
SUBARU SAFETY SENSE
101
