3
ENGLISH
FRANÇAISE
ESPAÑOL
■
Do not touch the spark plug and ignition cable when starting and operating the engine.
■
Never make adjustments on the machinery while it is connected to the engine, without
first removing the ignition cable from the spark plug. Turning the crankshaft by hand
during adjusting or cleaning might start the engine, and cause serious injury to the
operator.
■
Operate the engine on a stable, level surface.
If the engine is tilted, fuel spillage may result.
NOTE
Operating the engine at a steep incline may cause seizure due to improper
lubrication even with a maximum oil level.
■
Do not transport the engine with fuel in tank or with fuel strainer valve open.
■
Do not move the engine while in operation when it has been removed from the
equipment.
■
Keep the unit dry (do not operate it in rainy conditions).
WARNING
: BEFORE PERFORMING ADJUSTMENTS OR REPAIRS
■
Unplug power supply (only engines equipped with 120V electric start)
CAUTION
: PRE-OPERATION CHECKS
■
Carefully check fuel hoses and joints for looseness and fuel leakage. Leaked fuel
creates a potentially dangerous situation.
■
Check bolts and nuts for looseness. A loose bolt or nut may cause serious engine
trouble.
■ Check the engine oil and refill if necessary.
■ Check the fuel level and refill if necessary. Take care not to overfill the tank.
■ Keep cylinder fins and recoil starter free of dirt, grass and other debris.
■ Wear snug fitting working clothes when operating the engine.
Loose aprons, towels, belt, etc., may be caught in the engine or drive train, causing a
dangerous situation.
■
Do not choke carburetor to stop engine.
■ Make sure spark plug, muffler and fuel cap are in place.
■
Do not crank engine with spark plug removed.
■ If engine floods, set choke to OPEN/RUN position, place throttle in FAST and crank
until engine starts.
