Subaru Legacy Outback 2006, Owner'S Manual

Page: 95 / 456

2-10
Keys and doors
„
Hazard warning flasher inter-
lock function
Operation of the remote keyless entry sys-
tem can be confirmed easily outside the
vehicle.
y
When the “ ” or “OPEN” button is
pressed to unlock all of the doors (and the
rear gate of a Station wagon), the hazard
warning flashers flash twice.
y
When the “ “ or “LOCK” button is
pressed to lock all of the doors (and the
rear gate of a Station wagon), the hazard
warning flashers flash once.
y
When the “ ” button is pressed, only
the rear gate (Station wagon) opens. At
this time, the hazard warning lights flash
twice. (for vehicle without double locking
system)
y
When the “ ” button is pressed for at
least 1.5 second, the trunk lid (Sedan) is
unlocked. At this time, the hazard warning
flashers flash twice.
If the trunk lid of a Sedan is not completely
closed when the “
” button is pressed,
the hazard warning flashers flash five
times. (for vehicle without double locking
system)
y
When the “OPEN” button is pressed for
at least 2 seconds, all four doors unlock
and the trunk lid (Sedan) then unlocks. At
this time, the hazard warning lights flash
twice (for vehicles with double locking sys-
tem).
The operational/non-operational setting of
the function that causes the hazard warn-
ing flashers to flash when the doors and
rear gate (Station wagon) or trunk lid (Se-
dan) are locked and unlocked can be
changed.
Vehicle with navigation system:
The operative/non-operative setting can
be changed using the monitor. For details,
please refer to the monitor instruction
manual.
Vehicle without navigation system:
The operative/non-operative setting can
be changed by a SUBARU dealer. We
recommend that you contact the nearest
SUBARU dealer for details.
„
Replacing battery
If the transmitter fails to operate when
used within the standard distance, this
may indicate a weak battery. Replace the
battery as soon as possible. It is recom-
mended that you have the battery re-
placed by your authorized SUBARU deal-
er. If you have to replace the battery by
yourself, use utmost care that no dust and
water may enter the transmitter.
T
A type
1. Remove the screw on the transmitter
case.
2. Open the case using a flat-head screw-
driver.
200390
200391