5
Position the rear body side molding location template in place as shown.
Make sure the template is aligned with front edge of rear door and
center of body feature line. Then check the top tab mark so that it lines
up with door gap, place tape over the cut out holes (5).
LEGACY
OUTBACK
Tab Mark
Body
Feature Line
Cut Out
Tape Holes (5)
Tab Mark
Body
Feature Line
Cut Out
Tape Holes (5)
Tab Mark
Body
Feature Line
Cut Out
Tape Holes
Cut Out
Tape Holes (6)
Body
Feature Line
Body
Feature
Line
LEGACY
OUTBACK
Cut Out
Tape Holes (6)
Body
Feature
Line
Position the front body side molding location template in place using
locking profile as shown. Make sure the template is aligned with rear
lower edge of front door and centered on body feature line.
SPN0003268
3-21-19
Door Gap
Door Gap