5 OF 7
ISSUE
00
DATE
22 Jun 2018
SUBARU OF AMERICA
PART NUMBER
H001SFL300
PANEL RE-ASSEMBLY
7
1. Re-connect the glove box lamp connector to the lamp on the glove box inner cover. Re-install the glove box inner
cover by engaging the six (6) pressure clips and secure with seven (7) Phillips screws.
2. Re-install the passenger’s side ornament panel by engaging the four (4) pressure clips and one (1) fi nger clip.
3. Re-install the right side dashboard panel by engaging the four (4) pressure clips.
4. Re-install the glove box and strut.
5. At the end of the installation, insert the Quick Reference Cards into the Owner’s Information Kit.
8
UNDER HOOD WARNING LABEL MOUNTING
1. Using alcohol, clean the top of the air intake plenum,
near the radiator core support.
2. Remove the release liner from the under hood warning
label and secure to the top of the air intake plenum,
as shown. (FIGURE M)
FIGURE M
WARNING: / ADVERTISSEMENT
WARNING: / ADVERTISSEMENT
