Existing harness
40mm
Cable tie
Pocket(for deck)
Urethane sheet
(attach one sheet)
Urethane sheet
(align the length and cut)
Fold back
Align
Align
Existing harness
-
17
-
6MT
(17) Aligning with the end of the sponge of
existing harness, attach the two urethane
sheets and fold them back.
(18) Use a cable tie to fix the indicated position
of the existing harness to the pocket
(for deck).
WRX
-
18
-
Nose pliers
Clip
Existing harness
How to release the clip
Remove the clip at this position
from the exterior.
Console box ASSY
Clips
Existing harness
Remove the clip at this position
from the exterior.
(1) Remove the existing harness.
(Clips: 8 points)
Use nose pliers to pinch the six clips on
the existing harness and release them.
Release the two clips shown by the arrows
in the figure from the exterior of the
console box ASSY.
NOTE
CVT
Console box ASSY
Console box rear
Clips
(2) Remove the console box rear.
(Clips: 6 points)
WRX
