Black plate (479,1)
一
般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
Trunk lid (Sedan)
–
if the
trunk lid cannot be opened
In the event that you cannot open the
trunk lid, you can open it by performing the
following procedure.
1. Fold down the rear seat. For details,
refer to
Folding down the rear seatback
2. Enter the trunk from the rear passen-
ger compartment.
Trunk lid release lever
3. Pull the trunk lid release lever. Then
the trunk lid will open.
Rear gate (Outback)
–
if the
rear gate cannot be opened
In the event that you cannot open the rear
gate by pressing the rear gate opener
button (all models) or using the power rear
gate (if equipped), you can open it from
inside the cargo area.
1. Remove the access cover at the
bottom-center of the rear gate trim using
flat-head screwdriver.
2. Locate the rear gate lock release lever
behind the rear gate trim panel.
CAUTION
Never operate the rear gate lock
release lever with your fingers be-
cause doing so may cause an injury.
Always use a flat-head screwdriver
or a similar tool.
Models without power rear gate
In case of emergency/Trunk lid (Sedan)
–
if the trunk lid cannot be opened
9-31
–
CONTINUED
–
9
