Black plate (399,1)
北
米
Model "A1140BE-A" EDITED: 2012/ 6/ 20
the cooling system and connections be
checked for leaks, damage, or looseness.
&
Engine coolant
!
Checking the coolant level
WARNING
Never attempt to remove the radia-
tor cap until the engine has been
shut off and has cooled down
completely. Since the coolant is
under pressure, you may suffer
serious burns from a spray of boil-
ing hot coolant when the cap is
removed.
1)
“
FULL
”
level mark
2)
“
LOW
”
level mark
Check the coolant level at each fuel stop.
1. Check the coolant level on the outside
of the reservoir while the engine is cool.
2. If the level is close to or lower than the
“
LOW
”
level mark, add coolant up to the
“
FULL
”
level mark. If the reserve tank is
empty, remove the radiator cap and refill
coolant up to just below the filler neck as
shown in the following illustration.
1)
Fill up to this level
3. After refilling the reserve tank and the
radiator, reinstall the cap and check that
the rubber gaskets inside the radiator cap
are in the proper position.
Maintenance and service
11-11
–
CONTINUED
–
11
