Subaru 2013 Forester, Owner'S Manual

Page: 219 / 529

Black plate (221,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
!
Sensor for the auto on/off head-
lights (rain light sensor) (if
equipped)
The sensor is on the windshield glass as
shown in the illustration.
CAUTION
If any object is attached on or near
the sensor, the sensor may not
detect the level of ambient light
correctly and the auto on/off head-
lights may not operate properly.
&
High/low beam change
(dimmer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light
“ ”
on the combina-
tion meter is also on.
To switch back to low beam, pull the lever
back to the center position.
&
Headlight flasher
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works
even though the lighting switch is in the
off position.
When the headlights are on high beam,
the high beam indicator light
“ ”
on the
combination meter is also on.
Instruments and controls/Light control switch
3-91
–
CONTINUED
–
3