Subaru 2013 Forester, Owner'S Manual

Page: 194 / 529

Black plate (196,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
3-66
Instruments and controls/Multi function display
3. Pull the
“
/SET
”
switch toward you.
4. Select an item by operating the
“ ”
or
“ ”
switch, and then pull the
“
/SET
”
switch toward you.
5. Select
“
Set
”
by operating the
“ ”
switch, and confirm the setting by pulling
the
“
/SET
”
switch toward you.
6. The system will notify you that the
setting is complete.
&
Screen settings
The items in the screen settings can be
set. To change the items, operate the
“ ”
or
“ ”
switch, and then pull the
“
/SET
”
switch toward you.
!
Preparation for screen settings
1. Turn the ignition switch to the
“
ON
”
position.
2. Pull and hold the
“
/SET
”
switch
toward you to show the selection screen.
3. After the selection screen is displayed,
operate the
“ ”
or
“ ”
switch to show the
“
Screen Setting
”
item. Then, pull the
“
/
SET
”
switch toward you.
!
Top display setting
1. Perform the preparation steps accord-
ing to
“
Preparation for screen settings
”