Black plate (415,1)
一
般
Model "A2470GE-B" EDITED: 2010/ 9/ 24
6. Pour the coolant and fill to the reser-
voir tank
’
s
“
FULL
”
level mark.
CAUTION
.
Be careful not to spill engine
coolant when adding it. If coolant
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or
a fire. If engine coolant gets on
the exhaust pipe, be sure to wipe
it off.
.
Do not splash the engine coolant
over painted parts. The alcohol
contained in the engine coolant
may damage the paint surface.
7. Put the radiator cap back on and
tighten firmly. At this time, make sure that
the rubber gasket in the radiator cap is
correctly in place.
8. Start and run the engine for more than
5 minutes at 2,000 to 3,000 rpm.
9. Stop the engine and wait until the
coolant cools down [50 to 60
8
C (122 to
140
8
F)]. If there is any loss of coolant, add
coolant to the radiator
’
s filler neck and to
the reserve tank
’
s
“
FULL
”
level.
10. Put the radiator cap and reservoir cap
back on and tighten firmly.
Air cleaner element
The air cleaner element functions as a
filter screen. When the element is perfo-
rated or removed, engine wear will be
excessive and engine life shortened.
It is unnecessary to clean or wash the air
cleaner element.
WARNING
Do not operate the engine with the
air cleaner element removed. The air
cleaner element not only filters
intake air but also stops flames if
the engine backfires. If the air
cleaner element is not installed
when the engine backfires, you
could be burned.
CAUTION
When replacing the air cleaner ele-
ment, we recommend that you use a
genuine SUBARU air cleaner ele-
ment. If it is not used, there is the
possibility of causing a negative
effect to the engine.
Maintenance and service
11-25
–
CONTINUED
–
11
