Subaru 2008 IMPREZA, Owner'S Manual

Page: 136 / 381

3-28
Instruments and controls
&
Headlights
To turn on the headlights, turn the knob on
the end of the turn signal lever.
first position
Parking lights, instrument panel illumina-
tion, tail lights, front side marker lights and
license plate lights are on.
second position
Headlights, parking lights, instrument pa-
nel illumination, tail lights, front side
marker lights, and license plate lights are
on.
&
High/low beam change (dim-
mer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light
“ ”
on the instru-
ment panel is also on.
To switch back to low beam, pull the lever
back to the detent position.
&
Headlight flasher
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works
even though the light switch is in the
“
OFF
”
position.
When the headlights are on high beam,
the high beam indicator light
“ ”
on the
instrument panel also comes on.
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.