Subaru 2006 Impreza Owner'S Manual Download Page 173

Page: 173 / 365

5-10

Audio

lected in a similar way.

NOTE

No disc change takes place if the

button corresponding to the storage

tray in which no disc is loaded is

pressed.

If the disc select button correspond-

ing to the disc now in playback is

pressed again, the disc will be replayed

from its beginning.

To select a song from its beginning
Forward direction

Briefly press the

side of the button

(12) to skip to the beginning of the next

track. Each time this side of the button is

pressed, the indicated track number will

increase.

Backward direction

Briefly press the

side of the button

(12) to skip to the beginning of the current

track. Each time this side of the button is

pressed, the indicated track number will

decrease.

Fast-forwarding and fast-reversing
Fast-forwarding

Press the

side of the button (12)

continuously to fast-forward the disc.

Release the button to stop fast-forward-

ing.

If you continue fast-forwarding to the end

of the disc, the CD changer will automati-

cally stop fast-forwarding and start play-

back beginning with the first track on the

current disc.

Fast-reversing

Press the

side of the button (12)

continuously to fast-reverse the disc.

Release the button to stop fast-reversing.

If you continue fast-reverse to the begin-

ning of the disc, the CD changer will auto-

matically stop fast-reverse and start play-

back beginning with the first track on the

current disc.

Repeat playback

Use this to play a certain track repeatedly.

During playback, press the

RPT/RDM

button (14) and release it in less than 2

seconds. The

RPT

indicator will come on

and the song will be played continuously.

To cancel the repeat mode, press the but-

ton again. Then the

RPT

indicator goes

out, and normal playback mode is re-

stored.

Random playback

Use this to play the tracks on the disc in

random order. During playback, press the

RPT/RDM

button (14) and hold it in for

more than 2 seconds. The

RDM

indica-

tor will come on and all songs on the disc

will be played in a random order.

To cancel the random mode, press the

button again. Then the

RDM

indicator

goes out, and normal playback mode is

restored.

Summary of Contents for 2006 Impreza














































































































































































































































































































































































Search results

Summary of Contents for 2006 Impreza

Reviews:

Related manuals for 2006 Impreza

Brands by name

Popular brands

Subaru 2006 Impreza, Owner'S Manual

Search results

Summary of Contents for 2006 Impreza

Reviews:

Related manuals for 2006 Impreza

Brands by name

Popular brands