3. Ignition Coil and Ignitor
Assembly
S181015
A: REMOVAL
S181015A18
Direct ignition type has been adopted. Refer to the
“Spark Plug Removal” for removal procedure.
<Ref. to IG(DOHC TURBO)-4, REMOVAL, Spark
Plug.>
B: INSTALLATION
S181015A11
Install in the reverse order of removal.
Tightening torque:
16 N·m (1.63 kgf-m, 11.8 ft-lb)
C: INSPECTION
S181015A10
Because ignition coil is a direct ignition type, the
resistance cannot be measured in a single unit. For
inspection procedure of ignition system, refer to
the following. <Ref. to EN(DOHC TURBO)-72,
IGNITION CONTROL SYSTEM, Diagnostics for
Engine Starting Failure.>
IG(DOHC TURBO)-8
IGNITION COIL AND IGNITOR ASSEMBLY
Ignition
